CHEMIPEARL(development article)

Polyolefin-based Aqueous Dispersion

CHEMIPEARL™, which is made of fine particles of polyolefin, uses Mitsui Chemicals’ unique technology and is an environmentally friendly aqueous dispersion that does not use emulsifying agents or organic solvents (except for some grades and Products in Development).

 

Abrasion resistant Improved slip properties Anti-blocking agent Superior application properties Outstanding heat-sealing properties Hygienic qualities


Applications detail

Additives for printing ink, heat sealants

BASIC INFORMATION

New Chemipearl™ is polyolefin dispersion using our proprietary technology.
New Chemipearl™ has no chloric material or solvents.
New Chemipearl™ has improved adhesive strength for a variety of substrates.

Primer for Coating
CHEMIPEARL™EV、ET、EP、HP ※The detail of HP-400 is written as below.
Heat-sealing agent for Aluminium and Olefin Substrates
CHEMIPEARL™ EP501H+α ※The detail of EP501H is written as below.
Heat-sealing agent for Olefin Substrates
CHEMIPEARL™ EP、HP ※The detail of HP-400 is written as below.
Adhesive Primer and Heat-sealing agent for Paper , Nonwoven fabrics , Fiber
CHEMIPEARL™ EV、ET、EP、HP ※The detail of HP-400 is written as below.

Heat seal strength of EP501H
※Please contact us if you’d like the details of combination
Evaluation conditions

Thickness:3μm
Drying:150℃ × 30sec
Heat sealing:200℃ × 2sec (CPP / CPP: 150℃ × 5sec)
Weight:1 kg / cm2
Evaluate after 24 hr at room temp.

Evaluation conditions

Thickness:10µm
Baking:80℃ × 30 min
10 × 10 (1mm width) cross-cut adhesion test (using adhesion tape)
After drying, leave it at room temp.

○ : Good Adhesion × : Poor Adhesion

PET:Polyethylene terephthalate
PS :Polystyrene
PES:Polyether sulfone

PBT:Polybutylene terephthalate
PPE:Modified polyphenylene ether
POM:: Polyacetal

PC :Polycarbonate
PPS:Polyphenylene sulfide
Glass:JIS_R3202

Grades and Applications of CHEMIPEARL™
Grades and Applications

CHEMIPEARL™ GRADES AND APPLICATIONS(A Type/M Type/S Type/V Type)
CHEMIPEARL™ GRADES AND APPLICATIONS(A Type/M Type/S Type/V Type)
CHEMIPEARL™ GRADES AND APPLICATIONS(W Type)
CHEMIPEARL™ GRADES AND APPLICATIONS(W Type/WP Type))

Additives for Printing Inks
Abrasion resistant characteristics of CHEMIPEARL™

1.Particles project above the surface of the ink.

2.In the rub-off test,particles are spread on the surface of the ink.

3.Soft wax dispersion has excellent rub-off resistance *1,but gives low slide angle.

Before Abrasion Test Before Testing
After Abrasion Test After Testing
CHEMIPEARL™’s Resistance to Abrasion

High abrasion resistant qualities with minimum application

Thickness of Coating

Amount Of
Coating
0.2%0.5%1.0%
CHEMIPEARL™
W410
CHEMIPEARL™
W400
Wax Dispersion of Competitive Product
Non-Applied Surface

Abrasion Test using red ink. (Weight: 4 lbs / Friction Times: 120 rubs)

CHEMIPEARL™ W Grade Distribution
CHEMIPEARL™ W Grade Distribution
Heat sealing applications of CHEMIPEARL™
Heat sealing applications of CHEMIPEARL™
Chemipearl™ S Al/Al Heat Seal Strength
Evaluation Results in Al/Al System AL Foil:40µm Coating Weight: 3.5-4.0 g/m2(dry) Drying Condition: 120°C×30sec Heat Sealing:2kg/cm2×1Sec Peeling Mode:T mode Peeling Speed:50mm/min
Chemipearl™ S and V Paper/Paper Heat Seal Strength
Evaluation Results in Paper/Paper System paper: 105 g/m2 Coating Weight: 3.5-4.0 g/m2(dry) Drying Condition: 120°C×30sec Heat Sealing:2kg/cm2×1Sec Peeling Mode:T mode Peeling Speed:50mm/min
Application of CHEMIPEARL™S
ケミパールSの使用例
ケミパールSの使用例
ケミパールSの使用例
CHEMIPEARL™ V Application for Anti-blocking Agents
Application for Anti-blocking Agents

CHEMIPEAL™ V

CHEMIPEAL™ V

CHEMIPEAL™ A

CHEMIPEAL™ A

PDF Catalog

Contact Us

Coatings & Engineering Materials Division