Low molecular weight polyolefin

Applications detail

Lubricant for PVC, pigment dispersant, releasing agent for engineering plastics and toner


Hi-WAX comprises a low molecular weight polyethylene (PE) manufactured by direct polymerization, a technique developed by Mitsui Chemicals, Inc. on the basis of Ziegler polymerization technology, and low molecular weight polyolefin made by a thermal cracking process.

Hi-WAX is more stable than other synthetic and natural waxes, and a wide variety of grades are commercially available. These grades are therefore used for a broad range of applications, including those in highly technological areas such as toners for plain paper copying and film condensers as well as traditional uses comprising pigment dispersants, slip agents and mold release agents for the molding of various synthetic resins, modifiers for printing ink and paints, and aids for textile treatment, among others.

Each grade of Hi-WAX possesses distinguished characteristics that can function effectively in their proper use.

An assortment of various types of Hi-WAX: High-density polymerization type, low-density polymerization type, acid-value type, acid-modified type, special monomer-modified type, low-density PE-cracked type and PP-cracked type.

Along with properties such as releasability, viscosity adjustment, compatibility, slip properties and surface modification properties, more than 30 grades are opening up possibilities for their use in new fields through the proper use of these properties and grades.

Hi-WAX is very stable compared with natural and synthetic waxes, so our wax is widely applicable to a range of uses in numerous areas.

What is Hi-WAX?
  • Solid/semisolid and brittle organic substance at room temperature.
  • Low melting point (less than 150℃) and low melt viscosity.
  • Crystalline and low molecular weight (300-10,000) resin.

Higher crystallinity

Higher melting and softening points compared with natural and other synthetic waxes

Excellent heat resistance and thermal stability
Excellent chemical resistance and electrical insulation properties.
Good affinity with polar polymers, inorganic chemicals and metals.
Easy to pulverize.

Pigment dispersant, Release agent for injection molding, Abrasion resistance of printing ink, Textile treatment agent, Slip agent for PVC, Release agent for toner.

High-density type

High hardness and softening point due to high density and crystallinity.

Low-density type

Low density and crystallinity that are attributable to low hardness and softening point.

Acid-value type

Good affinity with polar polymers, inorganic chemicals, metals, etc. Emulsifiable (High Acid-value grades).

Acid-modified type

Reactive with alcohols, amines, isocyanates, oligomer with epoxy group, etc.

Special monomer modified type

Good miscibility with polyethylene and aromatic hydrocarbon resins such as PS, ABS and Polyesters.

Thermally cracking low-density polyethylene type

Extremely low crystallinity. Good miscibility with other resins.

Thermally cracking polypropylene type

Raised softening points and high hardness. Highest melting point.

Classification of Hi-WAX™

Classification of Hi-WAX™

Grades and physical properties

Representative Uses, of Hi-WAX™, and Recommended Grades

Representative Uses, of Hi-WAX™, and Recommended Grades

Pigment dispersant

Add Hi-WAX and pigment to the three-roll-mill to make up color base.


It is possible to manufacture high content color masterbatches because Hi-WAX is compatible with pigment and expresses excellent kneading behavior into the higher shear of the extruder.

Recommended grades

PE/PP:NL200, NL800
PVC:325MP, 4202E

Pigment Dispersant
Pigment Dispersant
Slip agent for PVC

Add PVC powder, stabilizer, calcium, calcium stearate and Hi-WAX to the twin screw extruder.


It is possible to express excellent slip properties and prevent the degradation of PVC because Hi-WAX affects the area between the surface of the molder and melting PVC.

Extrusion: Saving power consumption and increasing productivity.
Injection: Improving the appearance of the molding.

Recommended grades

Rigid PVC(Pipes, Fittings), Soft PVC(Wire & Cable, Sheets):220MP, 4202E

Slip Agent for PVC
Pigment Dispersant
Release agent for toner

Add binder resin, pigments, CCA (charge control agent) and Hi-WAX to the kneader, then pulverize to make up toner.


It is possible to give anti-offset to a fixing roll because Hi-WAX can be formed as wax lubricant film on the fixing roll.

Recommended grades

NP055, NP105, NP505

Release Agent for Toner
Release Agent for Toner
Textile treatment agent

Disperse Hi-WAX in hot water to make up wax emulsion. Immerse textiles in the emulsion to attach wax to the surface of the textile, then dry heat.


It is possible to improve high-speed sewing, tear strength and texture.

Recommended grades

Shrink-proof:4202E, 4051E
Sewing improvement:4051E, 4052E
Texture improvement:2203A

Texrile Treatment Agent
Texrile Treatment Agent
Release agent for injection molding

Add pellets of ABS, PS, etc. and Hi-WAX to the injection molder.


It is possible to express excellent releasability and improve the molding cycle and extrusion properties such as die maintenance.

Recommended grades

ABS:200P, 400P, 220MP

Release Agent for Injection Molding
Release Agent for Injection Molding

Contact Us

Sales & Marketing Center
TEL +65-6534-2611
FAX +65-6535-5161